Understand box drawer construction and its height offsets
See how box drawers hang from the top with explicit heights and per-drawer offsets, and how box height relates to fascia height.
In BOX drawer construction, every drawer's height is set explicitly and the set of boxes hangs from the top of the partition with per-drawer top offsets (a taller drawer grows downward; the drawers above it stay put) - the set does not have to fill the partition, and fillers/fascia follow the set height.
✓ १८ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासलेIn box drawer construction, the drawer system panel offers an 'Offset from top' value that positions the drawer/fascia from the top of the system.
✓ १८ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले
In box drawer construction, the drawer parameters offer an 'Offset from top' value that positions the drawer/fascia from the top of the system.
✓ १८ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले
In box drawer construction, the box side height is the carcass height of the box panels, and any height reduction is subtracted from the fascia (front) height to give the resulting box height, so the fascia value should be chosen with that reduction in mind.
In box drawer construction the drawer box height should be set to less than or equal to the drawer height, so the box sits correctly inside the drawer rather than popping out.
The drawer and the internal carcass box are separate components, so editing the drawer's height does not change the carcass box.
✓ १८ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले