Read and edit board layouts in Production
Open Production > Board Layout to see each board type's sheets, yield and offcuts, and edit a layout before saving or discarding it.
In the design portal Production > Board Layout lists the board types (core, external and internal finish, panels, yield %, sheets per size).
The board layout summarises sheets per board type, a board type being the core + external + internal finish combination (e.g. carcass 16mm ply / white, shutters 16mm ply / oak, back panels 6mm ply), with panels, yield and sheet count each.
✓ 2026년 10월 19일에 제품에서 확인됨The design's Board Layout reports, for each sheet type and for all sheet types together, the number of sheets, an estimated processing time, the total viable offcut area (in square metres) and the size of the largest offcut (for example 1220 x 1758 mm).
✓ 2026년 10월 20일에 제품에서 확인됨A (re)generated layout first opens 'Optimization Statistics' (System Recommendation: Balanced / Least Material / Least Processing Time with sheets, estimated time and offcuts per choice).
'Edit Layout' is greyed ('Choose a Board Type to Edit') until a board type is open.
The board type shows L / W / T, margins, Grain (e.g. 'Lengthwise' for a Siberian Oak finish, 'No' for a plain one), Type (Postlam) and Yield.
'Edit Layout' offers Add New Sheet / Apply Changes / Discard Changes.
While Edit Layout is open in a board layout, switching to another board type is blocked with 'You need to exit layout editing to switch board type'; save or discard the layout edit first.
✓ 2026년 10월 20일에 제품에서 확인됨