타일링
가이드: 36
- 천장과 같은 방식으로 타일링 추가천장을 추가할 때와 똑같이 타일링을 추가한 다음, 기본 두께와 45도 회전, 90도 회전 같은 패턴 옵션을 조정하세요.
- 타일링 및 절단 도구로 벽 타일을 추가하고 12 mm로 돌출합니다직사각형 영역을 그려 12 mm로 돌출하고 벽 타일 재질을 선택하여 벽에 벽 타일을 추가한 다음, 패턴과 타일 크기를 조정합니다.
- 영역을 그리거나 pick 도구를 사용하여 바닥 타일을 배치합니다영역을 그리거나 pick 도구가 방 중심을 감지하도록 하여 방에 바닥 타일을 추가합니다.
- 벽을 선택하고 타일링 도구를 사용하여 벽 타일링을 추가하세요벽을 선택하고 타일링 및 절단 도구로 타일 영역을 그려 벽에 타일링을 추가하세요.
- 타일을 적용하고 타일 크기, 줄눈 색상 및 패턴을 조정합니다Pick a surface, apply tiling, then choose the pattern, tile size and grout line colour.
- 타일링 및 절단 도구로 벽 타일 클래딩 영역 만들기타일링 및 절단 도구에서 클래딩 경계를 그리고 적용하여 벽을 타일로 마감합니다.
- 천장 타일 패턴 재질과 줄눈선 색상 변경타일을 천장 패턴 재질로 적용한 다음 줄눈선의 색상을 변경하세요.
- 타일 크기를 설정하기 전에 타일 패턴 변경룸 표면에 타일링을 적용할 때는 먼저 타일 레이아웃을 선택한 다음, 해당 패턴이 허용하는 타일 크기를 설정하세요.
- 타일링 재료를 바닥 타일에서 벽 타일로 변경타일링 패턴 설정에서 타일링된 표면에 적용된 재료를 바닥 타일에서 벽 타일로 전환합니다.
- 룸 레벨에서 아키텍처의 타일과 천장 추가아키텍처 섹션의 타일과 천장을 적용하여 룸을 완성한 다음, 천장을 벽에 맞추세요.
- TI 단축키로 타일을 추가하고 Architecture 메뉴에서 천장을 추가합니다타일링 도구 또는 단축키 T I Enter로 방에 타일을 추가하고 깊이, 패턴, 크기, 줄눈을 사용자 지정한 다음 Architecture 메뉴에서 천장을 배치합니다.
- 타일링 깊이, 패턴, 타일 크기 및 줄눈 조정타일링 패턴을 원하는 각도로 회전하고 같은 패널에서 타일 크기, 줄눈 선 및 줄눈 색상을 변경하세요.
- Apply ceiling tiling from the architecture menuSelect the pick tool, click inside the room and apply the ceiling to tile it.
- 바닥 타일링의 타일, 패턴 및 줄눈 변경Architecture > Add Tiling로 바닥 타일링을 그린 다음, 타일링의 컨트롤에서 타일 크기, 패턴 및 줄눈 선을 조정합니다.
- 타일링 속성에서 타일 패턴, 크기, 줄눈 및 재질 변경적용된 바닥의 타일링 속성에서 배치 패턴, 타일 치수, 줄눈선 및 타일 재질을 조정합니다.
- Change tile size and material from the tile optionsSelect a tile to see its depth, then set its dimensions and apply a pattern or material at the scale you want.
- Convert an extruded surface to tiling and set tile patternTurn a drawn surface from extrude into tiling, pick a pattern and tile size, and adjust the grout to finish.
- 3D에서 타일링 모양을 편집하여 정렬과 불필요한 선 수정3D에서 타일링 정렬을 조정하고 불필요한 외곽선을 정리하여 타일링이 원하는 모양을 따르도록 합니다.
- 오른쪽 하단에서 타일링 배치도 또는 반사 천장 평면도를 활성화하세요조명과 같은 천장 요소를 배치하고 정렬할 수 있도록 타일링 배치도 또는 반사 천장 평면도 옵션을 켜세요.
- 평면도에서 Tiling Sketcher Mode 열기평면도에서 Tiling Sketcher Mode를 열고, 완료되면 디자인으로 돌아갑니다.
- Open the Tiling Pattern options for a selected tilingOpen the Tiling Pattern header in the Tiling Zone panel to reach rotation, pattern, tile size, grout line and material settings.
- Create a room and copy its tiling, flooring and ceiling to other roomsAdd a room on the floor plan, finish it with tiles and ceiling finishes, then copy-paste its elements into other rooms to reuse the setup.
- 핵심 설계 단계: 벽, 문, 창, 천장 및 타일링벽을 그리고 문을 추가하고 창을 추가하고 천장을 추가하고 타일링을 추가하여 설계를 완성합니다.
- 벽, 개구부, 천장, 타일을 순서대로 추가하여 방을 만드세요벽을 완전히 닫으면 천장 도구가 방 영역을 감지하고 천장을 자동으로 측정합니다. 그런 다음 3D에서 방을 보고 편집하세요.
- Add a ceiling and tiling with the pick toolDraw a ceiling and tiling inside the room with the pick tool, then adjust the tiling pattern and size.
- Add a roof and a tiling zone with the 2D sketcherDraw a roof outline and a tiling area in the 2D sketcher, then adjust the roof's settings in its panel.
- Build layered custom wall designs with tiling and fixed-distance copyCreate a custom wall design such as a rafter by building each layer from a rectangle with its own dimensions and extrude depth.
- 타일링 내에서 선 도구로 개방된 경계를 완성하세요타일링 기능 내에서 선 도구로 누락된 모서리를 그려 개방된 초안 영역을 닫으면 타일링이 성공할 수 있습니다.
- Create a ceiling or tiling from a closed room shapePick the shape tool, select a closed room shape, and apply it to create a ceiling or tiling.
- 타일링 및 절단 도구를 사용하여 벽에 다도를 만들기벽 표면에 닫힌 다도 윤곽을 그리면 타일링 및 절단 도구가 이를 다도로 적용합니다.
- Draw ceilings, tiling and strip lights in the 2D sketcherOpen the 2D sketcher to draw ceilings, tiling and strip lights with Pick, line, arc, circle, rectangle and polygon tools, then apply the result.
- Fix the non-zero area error when adding a slab, ceiling, roof, rail or tilingSlab, Add Ceiling, Roof, Rail and Tiling all open the 2D sketcher, where you draw a closed shape before applying.
- 바닥 타일 간격 위로 벽면 유닛 하단 높이를 설정합니다기본 유닛이 제로 레벨 위 12 mm에 위치하는 이유를 알아보세요. 따라서 벽면 유닛 하단 높이는 표준 1450 mm보다 12 mm 위로 설정됩니다.
- 타일링 및 절단 도구에서 extrude, cut, front shift 사용하기타일링 및 절단 도구에서 도형을 그린 다음 extrude하거나 벽으로 cut하거나 앞으로 shift하여 디자인을 구성하세요.
- 키보드 단축키로 벽, 가구 및 타일링 추가짧은 코드를 입력하고 Enter를 눌러 가구 추가, 벽 그리기, 타일링 추가, 문 배치와 같은 일반 명령을 실행하세요.
- Use the pick tool to select internal wall faces for ceilings and tilingPick internal wall faces to sketch a ceiling and apply tiling, then adjust tile material, pattern, size and grout appearance room by room.