Infurnia 도움말

이 페이지의 한국어 버전은 아직 없습니다.

Design

Keep minifix and dowel orientation consistent across edges

Set the left and right top edges to the same construction so the hardware drills match on both sides.

  1. Changing a carcass edge's construction (which panel is inset and which is outset) also changes how hardware such as minifixes and dowels are fixed, because the drills are placed against the panels as actually built, not just the visual model.

  2. Setting the left and right top edges to the same construction (both 'top between the sides', or both 'top on left/right') makes the minifix and dowel orientation match on both sides, because the hardware is drilled against the panels as actually built.

  3. When the top edge construction is set differently on the left and right sides of a carcass (for example top on left but top between the sides on the right), the minifix and dowel orientation on the two side panels will differ, because each edge's drills follow that side's own construction.

  4. When the left and right top edges are set to different constructions, the minifix and dowel orientation differs between them; setting both top edges to the same construction keeps the hardware orientation consistent.

  5. When the left and right top edges of a carcass are set to different constructions, the minifix and dowel orientation differs between the two sides; setting both top edges to the same construction keeps the hardware orientation consistent.

  6. When the top panel's construction is set differently on the left and right edges, the minifix and dowel orientation comes out different on each side; setting both edges to the same construction (e.g. top on left and top on right, or left on top and right on top) makes the orientation match.

  7. When minifix and dowel orientation differs between the left and right sides of a carcass, the cause is that the two edges use different construction (for example top on one side but top between the sides on the other); setting both edges to the same construction keeps the hardware orientation consistent.