SKU prices, margins and taxes
Guides: 87
- Enter SKU prices one at a time or in bulk via CSVPrice your SKUs individually or in bulk so each item contributes its price to the quotation total.
- Build panel selling price from material cost plus edgeband, overhead and marginWork out a panel combo's selling price by adding material, edgeband, overhead and margin costs.
- Bulk edit SKU prices by same value or CSV re-uploadUpdate many SKUs at once by applying one price to all selected SKUs or by re-uploading a modified CSV of the SKU list.
- See the per-item cost breakdown of a cabinet in Price SettingsOpen Price Settings to see the cabinet as a whole and each laminate, hardware and other line item with its rate, then scroll to spot what drives the cost.
- Price shutter designs and hardware profilesPick a shutter pricing mode and price each hardware profile per running foot or per set.
- Bulk edit prices for a whole categoryChange prices for every item in a category at once with bulk actions in the admin portal.
- How core material choice drives priceLearn how the selected core material drives pricing and edge band selection, even when it is not used in the cut list.
- Read a cabinet's hardware and price detailsOpen a cabinet's price Details to see each hardware item's SKU, quantity and price, and the cabinet's final price in the footer.
- Understand how a cabinet row price is assembledLearn why a cabinet's price comes from its level-2 constituents rather than its SKU catalog price, and how to audit it.
- Apply wastage, tax and margin to arrive at a selling priceFold wastage factors, tax and margin into the panel and final selling price.
- Hardware BOQ shows hardware prices only, not core or finish materialsThe hardware BOQ carries pricing for hardware items only.
- How tax is computed before discount and reduced proportionallyLearn how the engine prices and taxes every element first, then applies discounts and claws back the tax on the discounted amount.
- Price every finish, core material and edge band in a designMake sure a rate is defined for every material used in a design, not only the main panels, before quotation setup.
- Price on actual board area to factor in wastageCharge on actual board area instead of actual panel area so wastage is factored into the price automatically.
- Change many SKU prices in one pass via Bulk EditTick the SKUs or groups in the admin catalogue and change their prices together with Bulk Edit.
- Edit SKU prices individually or in bulk via CSVChange one SKU's price directly or update existing prices across sales channels.
- Price hardware and accessories separatelyKeep hardware and accessories out of the panel template price and price them at the SKU level.
- Understand how quotations price by unit, not per panelSee how removing an accessory from a unit shows nil or empty in the accessory column and reduces the room cost so the client can see each unit's contribution to the total.
- Verify hardware price in admin portal advanced pricingConfirm that once a hardware price exists, the design portal uses it in the quotation without disturbing the rest of the pricing.
- Apply hardware price adjustments with a CSV uploadApply price adjustments across many hardware items at once with a CSV upload.
- Bulk edit prices, margins and taxes via CSVUpdate prices, margins and taxes for many SKUs at once by editing a downloaded CSV and uploading it back.
- Choose how product prices split in a detailed quoteSet 'Product price split in detailed quote' to show the product amount as separate Woodwork and Hardware lines in the quotation summary.
- Edit panel prices directly in the pricing templateOpen the panel pricing template and change the price values for the relevant core material and finish combination, without re-creating the template.
- How board pricing adds wastage to the priceLearn how turning board pricing on or off in price settings changes whether wastage is included in the calculated price.
- How the selling price is computed from the base priceLearn how margin and tax are applied to the pre-tax base value to derive the selling price.
- Price a quotation when no active sales channel is setLearn what happens when a quotation is generated without an active sales channel and how to price it against a specific channel.
- Price hardware per unit or per set in the hardware sheetSet the price unit in the hardware sheet so each hardware item is priced per unit or per set.
- Read the parts and prices shown for a constituent-priced cabinetOpen a cabinet's details to see each part's dimensions, material, finish and edge band, and how its quoted price and tax are shown.
- Set a SKU's default price, tax and marginOpen a SKU's pricing details and enter its pre-tax base price, unit, tax percentage and margin percentage.
- Set default and customer-specific prices for material propertiesSet default pricing for material properties, define prices per square foot for each material, and edit customer-specific pricing ranges separately from default pricing.
- Add extra charges and taxes to a quotationAdd absolute or percentage-based extra charges and taxes to a quotation.
- How a cabinet's overall price depends on included componentsLearn how the cabinet's overall price reflects which components are actually included in the combination.
- How panel pricing overrides SKU-level sales channel pricesLearn which pricing method wins when SKU-level costing and template-based panel pricing both apply.
- How taxes are added to a quotationLearn how taxes are applied on top of the calculated price in the quotation.
- Price false ceiling civil work as an area-based service chargeAdd a False Ceiling Services row in the Service Charges screen and price it per square foot of area.
- Price hardware and profiles per set in quotationsSet a procurement set size on a SKU so quotations count and price hardware and profiles in whole sets instead of pieces.
- Understand the three tables in Price SettingsLearn what the CBUs, panel pricing template and SKU Prices tables in Price Settings each hold.
- Add a per-square-foot price increase via advanced pricingApply a price increase for a design option by opening Advanced Pricing from the properties.
- Check item pricing at design level via Price SettingsOpen Price Settings to check the pricing of all keys at the design level.
- Collapse or expand the modify section in the price list panelUse the arrow control in the price list panel only to open or close the modify section, since it performs no export or selection action.
- Enable board-based pricing in price settingsTurn on board-based pricing for a quotation and set the portion charge percentage so the design is calculated with board-based pricing.
- Fix a missing price caused by a deleted SKURe-apply the finish on the affected component to restore price detection in an existing design.
- Fix a tax mismatch from apportioned-charge tax settingsWhen a quotation's tax total does not match the expected figure, check the tax percentage configured on apportioned charges.
- Hide price settings and finishes from designersStop designers from seeing price settings and finish details by disabling them for designers in the admin settings.
- How CBU units quote a flat SKU price with exclusionsLearn how a CBU SKU is quoted at its flat catalog price and how its exclusion list bills selected categories on top.
- How manual price overrides persist on a SKULearn how editing unit price, tax, margin, discount, sales channel or price type on a quotation row is saved against the SKU and stays with the design.
- Keep admin visibility of all channels and pricesThe admin retains visibility of all channels and prices.
- Price custom design items by hand on the quotationFor a custom design, set the quotation row to 'Custom' and enter the unit price, tax, margin or discount yourself for each custom item.
- Price sliding mechanism as miscellaneous connectorUse the miscellaneous connector to price a sliding mechanism, since it exists for pricing only.
- Read the colour legend on Price Settings > SKU PricesLearn what the colour legend on Price Settings > SKU Prices means and why its entries are not filters.
- Refresh and re-price items after a unit changeRefresh the window and re-price the item after a unit change, and confirm the unit was applied to the intended material or variant.
- Set channel prices and understand constructed item pricingGive a product a different selling price per sales channel and see why constructed items cannot be priced directly.
- Set combined panel prices at category or SKU levelConfigure combined panel prices for groups of similar finishes.
- Show leg fittings on top to view carcass priceEnable this setting so all fittings are displayed on top and the carcass price is shown correctly.
- Why a row's price exceeds its level-2 breakdownLearn how apportioned charges are folded invisibly into every row's price so a top-level row can exceed the sum of its visible second-level constituents.
- Read a quotation row's cabinet price detailsOpen the Details modal on a quotation row to see its panels, hardware, accessories, child units and other details.
- Assign sales channels to SKUs and bulk-edit pricesAssign sales channels at category and SKU level, then bulk-edit sales-channel and price-type values for many SKUs.
- Unmap the Default Sales Channel from SKUs and set custom pricesNew SKUs arrive mapped to the Default Sales Channel, so unmap it in bulk and switch a sales channel entry to Custom to give it its own price.
- Assign sales channels to products and users to control price visibilityCreate sales channels, assign them to products and users, and control which prices each user can see.
- Group finishes into rate bands and set channel pricesGroup finishes by type into all-inclusive rate bands and give sales channels their own selling price.
- Understand what a price type is and how prices are heldSee how a price type only holds per-SKU prices once attached to a sales channel, and what it cannot do.
- How sales channels map quality tiers to specific price fieldsLearn how sales channels let you create multiple quality tiers and account for channel-specific taxes and margins per unit.
- See panel pricing templates and panel prices in Price SettingsFind the panel pricing templates a design uses and the price details of every panel under the 'From panel pricing template' method.
- Switch price types and re-price an existing designSwitch the price type on an existing design to re-price it in place without copying or re-modelling it.
- Switch pricing mode in price settings and download CSV to verify ratesCheck each material's rate on the price settings screen and download the CSV to see exactly where prices are generated.
- Understand why all price types show the same priceLearn why every price type shows the same price and how to make one track the default again.
More guides 21
Show all (21)
- How panel pricing uses shutter, carcass and back panel combinationsLearn how expected combinations in price settings drive panel pricing for shutters, carcasses and carcass back panels.
- How board-based pricing calculates boards and wastageLearn how board-based pricing turns a design's real board consumption and wastage factor into its price.
- How shutter design pricing is calculatedLearn how a shutter design's price is built from its per-square-foot rate, its total shutter area and the prices of the panels inside it.
- Choose a pricing method: CBU, constituent elements or tag-based templatesLearn the three ways pricing can be done and what each method calculates price from.
- Edit panel pricing via CSV download and re-uploadChange panel pricing in bulk by downloading the template as a CSV, updating the prices, and re-uploading it.
- How modular items and 3D models are pricedLearn which items reprice when you change their material, size or finishes and which keep a fixed price.
- Move qty-priced SKUs out of per-length pricing categoriesLearn why hardware categories such as hanger rod price by default on a per-length basis.
- Switch a SKU between CBU and constituent pricingSet the pricing-source switch on a SKU's default price and know what each option includes.
- Use advanced pricing options and bulk actionsUpdate values across many products at once and control how each unit's final selling price is derived from cost and margin.
- Bulk edit core material pricing via CSV uploadUpdate core material pricing in bulk by downloading the CSV, editing only the pricing, margin and taxes fields, and uploading it back.
- How margin pricing is calculatedLearn how margin works as a share of selling price and how to price an item at double its cost.
- Create a new pricing template by importing from an existing oneCreate a new pricing template that inherits the structure and settings of an existing one, then adjust the material costs and selling prices as needed.
- Declare lamination type in Admin settings propertiesDeclare the lamination type in Admin settings properties so pre-finished items are not charged an extra finish price.
- Fix a carcass line showing Not Applicable without CBO pricingWhen a project is not using CBO (cabinet-based) pricing, the carcass line takes the constructed price instead of showing Not Applicable.
- Fix panel pricing that does not map from the templateCorrect a panel's core material or finish in the template so its price maps.
- How constituent and raw-material pricing worksGive each material in the design its own procurement price so the final quote reflects the actual materials selected plus margin.
- How hardware is priced inside or outside the cabinet rowUnderstand when hardware cost is added into the cabinet's price and when it is shown as its own line.
- How material pricing uses economic, mid-range and premium rangesLearn how material price ranges are configured in the admin portal and then used within the design when generating pricing.
- How pricing varies by material gradeLearn how the material grade you select sets the price and how to keep different rates for different grades in one pricing setup.
- Set up shutter-design and edge-band pricingFinalise shutter designs as a library with matching tags, or price from constituents when edge banding must appear.
- Switch corner unit frontal area basis to restore older pricing methodCorner unit pricing can be calculated on two frontal-area bases, and you can switch the preference to visible front to price corner units the older way.