Find hardware from hardware rules in outputs and BOQ
Learn where the hardware your org's hardware rules give a cabinet is listed, and what decides which rules reach a custom panel.
The hardware a cabinet gets from your org's hardware rules is still part of the cabinet and appears in Outputs > Raw Material Lists > Hardwares and in the Hardware BOQ, with each cabinet's reference (C1, C2 ...) and the quantities.
When a unit such as a drawer unit is added and its core and finished materials are set, the Outputs section automatically provides quantity details for raw materials, core materials, finished materials, edge band and hardware.
✓ ১০ অক্টোবর, ২০২৬ তারিখে প্রোডাক্টে যাচাই করা হয়েছেA custom panel's CAM > Panel Type (production portal only) decides which hardware rules reach it: a free-standing custom Horizontal Panel in a base unit got the legs of the org's bottom-panel legs rule (6 Cabinet PVC Legs on its single-panel connector set) only while its Panel Type was 'Bottom Panel'; as None, Carcass Panel, Fixed Shelf or Exposed Panel it got none, with no message.
✓ ১৯ অক্টোবর, ২০২৬ তারিখে প্রোডাক্টে যাচাই করা হয়েছেAdmin portal > Design Intelligence > Hardware Rules > Add Hardware Rule: the criteria ('If the following criteria is satisfied') can test Shutter > Shutter > Shutter Mechanism (Single Swing, Double Swing, Single Lift Up, Double Lift Up, Flap Down, Left / Right Bi-fold, Bi-corner Unit Double Swing, Rolling, None), Scenario > Panel 1 / Panel 2 > Panel Type, Panel Face, Shutter Mechanism, Height, Width, Depth, Shutter Design Tag, Scenario > Scenario > Scenario Type, Elevation from Floor, Cabinet / Wardrobe > Skirting > Front / Left / Right / Back Skirting Visibility and Strip Light > Total Strip Light length.