Individual SKU Modification:
Open Admin Portal:
Navigate to the catalogue section.
Select the specific SKU you want to modify.
Edit SKU Structure:
Click on Edit SKU Structure to open the SKU at a component level.
Turn off the countertop to clearly view the shutter and carcass.
Modify Shutter Back Gap:
Select the shutter and go to the Shutter System option.
Navigate to the Construction tab.
Find the Shutter Back Gap option, which is set to 2mm by default.
Input the desired value for the shutter back gap. For demonstration, set it to 100mm to visualize the gap clearly.
Observe the shutter moving out from the carcass by the specified distance.
Adjust the value as needed based on your construction style (e.g., 1mm, 3mm, or 4mm).
Save Changes:
Save the changes to apply them to the SKU.
Bulk Modification for Multiple SKUs:
Select Multiple SKUs:
Select all the SKUs you want to modify by checking the boxes next to them.
Initiate Bulk Action:
Click on Bulk Action and select Bulk Edit SKU Structure.
Confirm your selection and proceed to editing.
Modify Shutter Back Gap in Bulk:
Go to the Partition tab since a shutter is always a property of the partition.
Click on Add Partition.
Input the Partition ID. For the outermost partition, it is typically partition_1.
Scroll down to the Shutter Parameters section.
Find the Shutter Back Gap option and input the desired gap value in mm, e.g., 3mm.
Confirm and Publish Changes:
Proceed to the confirmation step and review the changes you are making.
Publish the changes and exit.
Verification:
The bulk edit SKU structure will be triggered, and all selected SKUs will have the specified shutter back gap applied.
Verify a few SKUs to ensure the changes have been applied correctly.
Summary:
Modify the shutter back gap for individual SKUs or in bulk.
Ensure changes are saved and published for consistency across all selected SKUs.
By following these steps, you can efficiently manage and modify the shutter back gap, ensuring it aligns with your design and construction standards.