Infurnia Support

To add countertop slab to your half wall, follow these steps:

Select the Wall: First, choose the wall where you want to add the slab.

Access the Tiling and Cutting Tool: Navigate to the tiling and cutting tool within your design panel on the left side.

Add the Shape: Within the tiling and cutting tool, locate the "Add Shape" option. Use the line/rectangle tools to sketch the elevation shape of your slab.

Apply the Outline: Once you've accurately drawn the outline, click the "Apply" button to confirm your selection.

Give It a Extrude Property: Select the newly created tiling outline and assign it the "Extrude" property in the design panel option.

Change the Depth: Enter the desired slab thickness into the Depth field. For example, for a 150 mm thick wall, enter 150 into the field.

Shift the Extrusion backwards: Enter the negative value of desired slab thickness into the Front Shift field. For example, for a 150 mm thick wall, enter -150 into the field.

Material Selection: To apply a specific type of material, fetch the desired material from your software's material library. In the carousel that opens, select the Countertop category or any other category and select the desired finish.

Finalize and Apply the Extrusion: Apply the changes by selecting the back to Designing arrow.

1. Select the Wall: First, choose the wall where you want to add the slab.
2. Access the Tiling and Cutting Tool: Navigate to the tiling and cutting tool within your design panel on the left side.
3. Add the Shape: Within the tiling and cutting tool, locate the "Add Shape" option. Use the line/rectangle tools to sketch the elevation shape of your slab.
4. Apply the Outline: Once you've accurately drawn the outline, click the "Apply" button to confirm your selection.
5. Give It a Extrude Property: Select the newly created tiling outline and assign it the "Extrude" property in the design panel option.
6. Change the Depth: Enter the desired slab thickness into the Depth field. For example, for a 150 mm thick wall, enter 150 into the field.
7. Shift the Extrusion backwards: Enter the negative value of desired slab thickness into the Front Shift field. For example, for a 150 mm thick wall, enter -150 into the field.
8. Material Selection: To apply a specific type of material, fetch the desired material from your software's material library. In the carousel that opens, select the Countertop category or any other category and select the desired finish.
9. Finalize and Apply the Extrusion: Apply the changes by selecting the back to Designing arrow.