Infurnia Support

In the Infurnia interface, locate the bar at the top right corner.

You will see three options: Floorplan, 3D, and 3-dot button. Click on the 3-dot button.

In the window that opens, fill in the plan name, and specify the top and bottom extents of the cut in the Visibility Range section. Specify the camera direction to be either Looking Down or Looking Up (for normal vs ceiling plan respectively)

Select Create and the custom plan will open

To view this elevation, in the Infurnia interface, locate the bar at the top right corner.

To specify the cut level, in the lefthand panel of the custom plan view, type in the desired level in the Top Cut Field.

Specify the starting depth of the cut by putting in the desired start level in the Bottom Cut field. 

To revisit the custom plan, you will see three options in the top right: Floorplan, 3D, and 3-dot button. Click on the 3-dot button. Against Custom Plans, you will see the names of available plans. Click on the name of the desired plan view to select it.

1. In the Infurnia interface, locate the bar at the top right corner.
2. You will see three options: Floorplan, 3D, and 3-dot button. Click on the 3-dot button.
3. Against Elevations, click on "+Create."
4. In the window that opens, fill in the plan name, and specify the top and bottom extents of the cut in the Visibility Range section. Specify the camera direction to be either Looking Down or Looking Up (for normal vs ceiling plan respectively)
5. Select Create and the custom plan will open
6. To view this elevation, in the Infurnia interface, locate the bar at the top right corner.
7. To specify the cut level, in the lefthand panel of the custom plan view, type in the desired level in the Top Cut Field.
8. Specify the starting depth of the cut by putting in the desired start level in the Bottom Cut field. 
9. To exit the plan, go to any other view
10. To revisit the custom plan, you will see three options in the top right: Floorplan, 3D, and 3-dot button. Click on the 3-dot button. Against Custom Plans, you will see the names of available plans. Click on the name of the desired plan view to select it.
     