Place a unit listing on an elevation and filter it

Add a schedule to an elevation, narrow it to that elevation's units, and apply the columns before placing it.

1. To put a unit listing on an elevation, use the add schedules option, pick the elevation in the component's Filters, then open Edit Fields to choose and reorder the columns (for example remove Model No. and keep width, depth and height), and click Apply before placing the schedule on the sheet.

   ✓ 20 Ekim 2026 tarihinde üründe doğrulandı

2. The filter controls sit on the left-hand side of the schedule component's panel, where you can select the elevation, the layer, or the level to narrow which line items appear.

   ✓ 20 Ekim 2026 tarihinde üründe doğrulandı

3. Each schedule can be filtered to a specific elevation.

   ✓ 20 Ekim 2026 tarihinde üründe doğrulandı

4. Selecting an elevation in the component's Filters narrows the schedule to that elevation's units.

   ✓ 20 Ekim 2026 tarihinde üründe doğrulandı

5. A schedule placed on an elevation is filtered to that elevation's wall, so it lists the cabinets touching that wall and refreshes itself when those cabinets are added, deleted or changed.

   ✓ 20 Ekim 2026 tarihinde üründe doğrulandı

6. Once a room is selected in a schedule's Filters, the schedule lists only the items belonging to that room.

7. The schedule must also be filtered to the correct room/elevation, since it shows materials for the selected room only.

   ✓ 20 Ekim 2026 tarihinde üründe doğrulandı

8. Schedules can be customised by applying filters such as SKU name or model number.

   ✓ 20 Ekim 2026 tarihinde üründe doğrulandı