See which drawer inputs a channel or tandem item locks

Find out which drawer inputs become read-only once a channel or tandem box item declares its own dimensions.

1. When a drawer channel item declares channel width, channel depth or drawer back gap in its catalog properties, those values drive the drawer's construction and the matching inputs in the drawer menu (Channel Width, drawer depth, Drawer Back Gap) become read-only/disabled.

2. The property values can be plain numbers or formulas referencing the surrounding panels' dimensions.

   ✓ 16 Ekim 2026 tarihinde üründe doğrulandı

3. Tandem boxes work the same way: their side gap and bottom panel depth properties determine the drawer's width and depth.

4. When a channel is applied, the drawer's usable width is reduced by the channel width on each side (the drawer width is the cabinet/system width minus twice the channel width).

5. Drawer height is not constrained by the selected channel: the channel properties lock only the drawer's width, depth and back gap, so each drawer's height can still be set freely.

6. The side reduction is taken from the channel width declared on the applied channel item.

   ✓ 18 Ekim 2026 tarihinde üründe doğrulandı