Set and change a filler's width on the drawer system

Add a left or right filler from the cabinet's drawer system and set how much space it takes by editing its Filler Width.

1. A filler is added from the cabinet's drawer system (Construction tab > Left Filler or Right Filler, then +).

   ✓ २० ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले

2. A filler's starting width is the unit's own construction value (Left / Right Filler Width; for a catalogue base unit it was 100 mm), not a fixed 50 mm.

   ✓ २० ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले

3. To change a filler's width, select the drawer system and edit Left Filler Width under Properties & Panel Visibility; the right side has its own Right Filler Width.

   ✓ २० ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले

4. A drawer system's Left / Right Filler Width is the space the side filler takes, not the filler panel's thickness: raising it from 18 to 25 mm moved the 18 mm filler panel 7 mm in from the carcass side, and the panel stayed 18 mm thick.

   ✓ २२ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले