Set the shutter gap for double swing shutters

Apply a consistent gap between the two panels of double swing shutters and on corner units.

1. Setting the Shutter Gap to 3 mm gives a 3 mm total gap between the two panels of a double swing shutter.

   ✓ २२ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले

   

   मार्गदर्शकाकडे परत जा✕

   

2. The gap between the two panels of a double swing shutter is separate from the left/right reductions applied to each side.

   ✓ २२ ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले

   

   मार्गदर्शकाकडे परत जा✕

   

3. On corner units the same gap must be applied by editing the corner unit's key structure separately.

4. To create a 3 mm gap on shutters, set a 1.5 mm reduction on each side (left and right).

   ✓ १० ऑक्टोबर, २०२६ रोजी प्रॉडक्टमध्ये तपासले

5. Select multiple units and set the left, right, top and bottom reductions to 1.5 mm and the shutter gap to 3 mm for double-swing units.