Rotate a cabinet and set its position and rotation

Turn a selected cabinet with the space bar or an exact Y angle, rotate a panel's finish, and read Position Y correctly against bottom height.

1. A cabinet is rotated in its Position/Rotation group (Customize tab), which holds its X, Y and Z position and a Y rotation (about the vertical).

   ✓ Verificato nel prodotto il 22 ottobre 2026

2. With the cabinet selected, the space bar turns it by 90 degrees.

   ✓ Verificato nel prodotto il 22 ottobre 2026

3. Any angle can be typed in the Y rotation field (45 degrees was tried).

   ✓ Verificato nel prodotto il 22 ottobre 2026

4. A panel of the cabinet offers Rotate Finishes (0, 90, 180 or 270 degrees), which turns the finish, not the panel.

   ✓ Verificato nel prodotto il 22 ottobre 2026

5. A cabinet's Position Y is not its bottom height: a wall unit and a loft placed from the floor plan both read Y 1400 with their bottom at 1700 mm, and Y 2000 puts the bottom at 2300; the offset is the same for both, so a loft at the wall unit's Y + 600 sits directly on a 600 mm wall unit.

   ✓ Verificato nel prodotto il 19 ottobre 2026