Add horizontal divisions to a shutter

Split a shutter into panels with the Divisional Shutter dropdown and see the division in the 3D model.

1. A shutter can be divided into multiple panels (horizontally or vertically). Individual division sizes can be fixed, but at least one division must remain non-fixed so it can absorb the remaining space: trying to fix the last flexible one shows 'All the other shutter panels are fixed. Cannot change dimension', and entering a size larger than the space left by the other fixed divisions shows 'The Width/Height Available is ... less than input dimension ...'. When divisions are added, the edges where two divisions meet automatically switch to invisible edgeband, as do edges covered by frame profiles. On framed (profile) shutters, the handle profile is chosen automatically opposite the hinge: a left-hinged door puts it on the right edge, right-hinged on the left, top-opening at the bottom, bottom-opening at the top (and on lift-up double systems the lower door carries the bottom handle profile).

2. To split a single shutter into different paddle divisions, use the Divisional Shutter dropdown and choose 'Add Horizontal Divisional Shutter' (available on the shutter unit or the shutter system).

   ✓ Verificato nel prodotto il 10 ottobre 2026

3. Each click on 'Add Horizontal Divisional Shutter' in the Divisional Shutter dropdown adds one more horizontal division, so the number of divisions equals the number of clicks.

4. A horizontally divided shutter is split into two parts that can each carry their own laminate.

   ✓ Verificato nel prodotto il 9 ottobre 2026

5. The division is reflected in the 3D model.

   ✓ Verificato nel prodotto il 10 ottobre 2026