Aide Infurnia

Cette page n'est pas encore disponible en Français.

Design

Split cabinet spaces with vertical partitions

Add vertical partitions to divide a space and set their widths by ratio or explicit values.

  1. To split a cabinet space with a vertical partition, go to partition level and add one vertical; the space is divided into two.

    ✓ Vérifié dans le produit le 10 octobre 2026
  2. The widths can be set by a ratio formula or by entering explicit widths for each side.

    ✓ Vérifié dans le produit le 10 octobre 2026
  3. To convert a two-shutter unit into a three-shutter unit, add a vertical partition between the shutters from the partition menu.

  4. The internal panel's depth can then be adjusted from the panel menu under construction.

    ✓ Vérifié dans le produit le 10 octobre 2026
  5. Hanger rods and pull-out hangers are added from the same partition-level construction entry as shelves, so they apply only to the selected portion.

    ✓ Vérifié dans le produit le 10 octobre 2026
  6. When building the internal layout, add the shelf or vertical partition first and set its height, then fix the vertical relative to the drawer and add the drawer at the drawer height, and finally select each divided space individually to add shelves, hanger rods or pull-out accessories.

  7. Shelf reveal is set on the partition itself and can be set to the intended value, including zero, rather than left at a non-zero default.

  8. Manually resizing a panel or adding extensions to close a door gap is not the correct construction method.