Hinges, connectors and hardware
Guides: 57
- Change the hinge brand for a designSet the hinge brand inside the design so the hinge rules and connector cards resolve the correct hinge variant.
- How hinge quantities are generated for carcass and shutter panelsLearn why hinges are counted from the interaction between a carcass panel and a shutter panel, and what happens when the carcass panel is turned off.
- Add a multi-purpose lock from panel hardwareAdd a multi-purpose lock to a cabinet panel and adjust its position afterwards.
- Add hardware to custom panel carcass jointsAdd connectors and hardware manually at carcass-to-carcass junctions between custom panels.
- Add locks, grills and other fittings with Panel HardwareAdd fittings such as locks, ventilation grills, stiffeners and hooks to a selected panel through Panel Hardware instead of separate commands.
- Add multiple hinge crank types to the hardware libraryEvery furniture item uses the default hinge unless you switch it to another crank type from the hardware library.
- Attach site hardware per cabinet via hardware rulesCreate hardware rules that attach the right hardware to each cabinet and wardrobe, then clean up and activate the rule to set up hinges.
- Set and edit hinge positions within defined rangesConfigure hinge positions in the admin portal, then adjust them within the defined ranges in the connector card editor.
- Add hardware to a design as a connectorAdd hardware to a design as a connector instead of a standalone catalogue item, and check it in QC mode's hardware tab when its origin is unclear.
- Auto-solve hinge and shelf collisions from the violations listUse the auto-solve option when the violations check reports a collision such as a hinge placed at the same position as a fixed shelf.
- Check and resolve hardware collisions before productionCheck for hardware collisions with the collision filter before sending a project to production, then resolve any collisions you find.
- Configure hinge dimensions for hinge-shelf collision detectionConfigure the dimensions for every hinge type individually so hinge-shelf collisions can be detected.
- How hinge count and position change with cabinet heightLearn how hardware rules set hinge count and placement by cabinet height range and update them automatically when height changes.
- Bulk-edit hinge positions across multiple shutters via scenario viewUse the scenario view flow to bulk-edit hinge positions across multiple shutters, and apply the same flow to replace one hinge type with another.
- Check a cabinet's shutter hardware mechanism in 3D or via BOQSee that the shutter hardware mechanism is associated with the specific cabinet it is applied to.
- Check hardware and materials in QC ModeUse QC Mode to verify each unit's hardware and materials against the design-wide raw materials list before production.
- Check manually added hardware in the BOQ, CAM and 3D viewManually added hardware appears in the BOQ but may not affect the CAM output or the 3D view.
- How default hinge configuration assigns hingesLearn how the system automatically assigns hinges when the designer does not explicitly specify them.
- How hinge scenario length is calculatedLearn that a hinge scenario's length is the common intersected length between the two panels it connects.
- Map hinges automatically from shutter heightSet the shutter dimensions and the hinges are mapped for you, with no manual entry.
- Model loft constructions with 0-crank hingesLoft constructions are always modelled with 0-crank hinges.
- Replace a hinge connector card to use a different hinge typeSelect a different hinge type even when no connector card exists for it.
- Attach utility hardware manually at panel level in designAttach utility hardware to a panel by selecting it and adding the item from the panel hardware list.
- Change hardware across multiple cabinets with the modify functionChange hardware such as drawer types on several cabinets at once instead of editing each cabinet individually.
- Find hardware from hardware rules in outputs and BOQLearn where the hardware your org's hardware rules give a cabinet is listed, and what decides which rules reach a custom panel.
- Fix hardware missing on custom panelsCheck panel types, dimensions and exposed status when expected hardware is not generated.
- Hardware borings show only on panels where the hardware is appliedUnderstand where hardware boring points appear in a cabinet and why an expected boring point may be missing.
- How automatic collision handling resolves hardware clashesLearn how the software resolves a hardware position that clashes with another element by adding a small extra offset.
- How hardware drills land on split top and bottom panelsLearn how shutter-mechanism hardware drills are placed when a cabinet's top and bottom panels are split into per-section pieces.
- How hardware positioning and shutter reductions workLearn how the platform handles hardware positioning on shutters and shutter reductions as built-in features for modular furniture.
- Select hardware individually or as a multi-selectApply hardware to a cabinet by selecting items one at a time or several at once.
- Set hardware connector range and quantity in manufacturing settingsAdd multiple range entries, each with its own quantity, so the connector is applied correctly across different panel sizes.
- Trace where hardware comes from in QC mode hardware tabOpen QC mode and use the hardware tab to see which hardware is applied to the design and how each item was added.
- Change model, flip door sides/hinge, and set window sill heightPlace a door or window, then adjust its model, opening direction, hinge position and dimensions from its properties.
- Add accessory drilling to a panel via panel hardwarePlace an accessory such as a lock on a panel as panel hardware, position it relative to the panel size, and check the drill positions in 2D CAM mode.
- Flip door swing and hinge, and set distance from wallSelect a placed door and flip its sides or hinge to change which way it opens and where it is hinged.
- Change skirting height by changing the hardwareChange a unit's skirting height by swapping the fixed-height PVC skirting hardware, commonly 100 mm or 150 mm.
- Flip door side, hinge, and two-way opening from door orientationsControl how a selected door opens by flipping its side or hinge, or enabling two-way opening.
- Set wardrobe shelf and hinge reveals larger than 5 mmChoose a shelf reveal large enough that wardrobe shelves and hinges do not collide, then check it against the hinge positions.
- Understand the shutter back gap and hinge screw edge distanceLearn how the 2 mm gap between a shutter and the carcass front affects the hinge screw edge distance.
- Add handles and profiles to panel hardwareAdd handles under the handle section and select the required profile from the list.
- Attach shutter mechanism hardware and manage its quantityAttach lift-up pistons, flap fittings, sliding rail sets and rolling-shutter mechanisms from the door-system menu, then control how many copies are attached.
- Change door/window model, width, thickness, flip side and hingeSelect a door or window and use the modify menu to change its model, width, thickness, opening side and hinge position.
- Set drawer tandem hardware at drawer levelChoose the tandem or drawer hardware for a drawer unit from the drawer level, using the SKUs configured in the catalogue.
- Add channels to drawer sets and hinges to cabinetsAdd channels to drawer sets and hinges to cabinets so each gets the right hardware.
- Add finger group details for sliding door top and bottom in hardware adminEdit construction elements and shutter offsets for sliding door top and bottom finger group details.
- Create and apply custom connector logic for hardware in bulkReplace or add hardware connectors across a design from the Connectors settings in Manufacturing Settings.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- How panel drill details show connector, hardware SKU and ruleSelecting a panel's drill in a design shows the connector, hardware SKU, applied rule and drill dimensions, and those values can be changed in the admin portal.
- Place doors after walls and edit size, height, thickness, hinge and modelAdd doors after your walls are ready, then adjust each door's size, orientation and model so it looks right in 3D.
- Understand which panel is panel two in hardware drillingLearn which panel is classified as panel two when a drill falls on its edge band.
More guides 6
Show all (6)
- Keep minifix and dowel orientation consistent across edgesSet the left and right top edges to the same construction so the hardware drills match on both sides.
- Link the correct SKU and set quantity and type for connectorsWhen editing connector properties, link the correct SKU within the hardware category and set the quantity and type, such as nylon sockets or double twisters.
- Set connector placement with rangesSet where connectors go by adding one or more ranges, adding another range when two different ranges are needed, and choosing connector types such as dowel and hinge.
- Find and set size limits on catalogue modelsOpen a hardware catalogue item to see the exact limits enforced and set the allowed range designers can use.
- Fix a 3D scene that fails to loadIf the 3D scene does not load and an error asks for WebGL 2.0 and GPU hardware acceleration, your browser cannot render the design.
- How per-set SKU quantities are rounded in schedulesUnderstand why per-set hardware quantities round up once at the design level while per-cabinet listings show consumed base quantities.