Change a panel's core in QC mode > Panels > Modify Panels

Set a panel's Core Material Source and, when you need a different core for that panel alone, switch the Source to Custom and change it.

1. In a design's production view (Modular Units), selecting a unit and then one of its panels shows the panel's card: Dimensions & Material (Finish dim, Cut dim, Core, External and Internal finish, Grain, Pre Milling) and Edgebands (the band on the Front, Back, Left and Right edges with its thickness and width, e.g. 'EB_0.8 x 22 (t = 0.8mm, w = 22mm)'), with 3D Viewer and Panel Drawing below it.

   ✓ ২০ অক্টোবর, ২০২৬ তারিখে প্রোডাক্টে যাচাই করা হয়েছে

2. In the production design's QC mode > Panels > Modify Panels, a panel's core follows its Core Material Source (for a drawer bottom: Drawer Carcass, Drawer Bottom Panel, Drawer Fascia, Exposed Panel (Drawer Fascia) or Custom).

3. The core can be changed for that panel alone after the Source is set to Custom, and only that panel's core changes in the cut list.