Cut shapes into a panel with a closed boundary

Draw a closed boundary shape, mark it as a cut and set the cut depth so the software knows where to cut the panel.

1. Draw a closed boundary shape, mark it as a cut, and set the cut depth (e.g. 18 mm for a through cut, or a shallow depth for a stepped recess).

   ✓ ৯ অক্টোবর, ২০২৬ তারিখে প্রোডাক্টে যাচাই করা হয়েছে

2. A closed boundary is required for the software to know where to cut the panel.

   ✓ ৯ অক্টোবর, ২০২৬ তারিখে প্রোডাক্টে যাচাই করা হয়েছে