Infurnia Support

To create a curved or chamfered edge for a countertop in Infurnia, follow these steps:

Select the Cabinet: Begin by selecting the kitchen cabinet for which you want to create a curved or chamfered edge on the countertop.

Access Countertop Settings: In the properties panel on the left, you should see a "Countertop" option within the design panel for the selected cabinet. Click on the drop-down arrow next to "Countertop" to open the details.

Extend the Countertop: If needed, you can first extend the countertop in the desired direction, such as by specifying an extension length. This can be done under the "Countertop" options in the design panel.

Edge Operations: In the "Edge Operations" section, you can choose the edge you want to modify. In your example, you mentioned changing the "front right" edge, which you can select from the options provided.

Select Fillet or Chamfer: You can choose between "Fillet" or "Chamfer" to create the desired edge type. If you choose "Fillet," you will need to specify the radius of the fillet (curve). If you select "Chamfer," you will need to specify the chamfer dimensions.

Apply the Edge Modification: After specifying the radius or dimensions, the countertop edge will be updated to have the curved (fillet) or beveled (chamfer) appearance.

1. Select the Cabinet: Begin by selecting the kitchen cabinet for which you want to create a curved or chamfered edge on the countertop.
2. Access Countertop Settings: In the properties panel on the left, you should see a "Countertop" option within the design panel for the selected cabinet. Click on the drop-down arrow next to "Countertop" to open the details.
3. Extend the Countertop: If needed, you can first extend the countertop in the desired direction, such as by specifying an extension length. This can be done under the "Countertop" options in the design panel.
4. Edge Operations: In the "Edge Operations" section, you can choose the edge you want to modify. In your example, you mentioned changing the "front right" edge, which you can select from the options provided.
5. Select Fillet or Chamfer: You can choose between "Fillet" or "Chamfer" to create the desired edge type. If you choose "Fillet," you will need to specify the radius of the fillet (curve). If you select "Chamfer," you will need to specify the chamfer dimensions.
6. Apply the Edge Modification: After specifying the radius or dimensions, the countertop edge will be updated to have the curved (fillet) or beveled (chamfer) appearance.

By following these steps, you can easily create curved or chamfered edges for countertops in Infurnia, allowing you to customize the design of your kitchen cabinets according to your preferences.