Infurnia Support

Select the drawer you want to change the height for. 

Look for the menu labeled "Drawer" on the right of the design panel. It would be arranged in a vertical order as Cabinet&gt;Partition&gt;Drawer Systems&gt;Drawer&gt; Panel etc. Click on it to access the settings related to drawer.

Within the "Drawer" menu, go into the "Quick Access" or "Construction" tab and you will find the "Dimension parameters" section. Click on the drop down next to it to open the details.

Input a revised value in mm for the drawer height to change the height of the drawer. 

If it is a two-drawer cabinet, then the other drawer's height will get revised as it will reduce by the same value as we have increased in the height of the selected drawer. Only one drawer can be a fixed height in this case. 

Similarly, in case of a three-drawer cabinet, two drawers can be of fixed heights and one drawer will be considered as per the remaining height of the cabinet. 

1. Select the drawer you want to change the height for. 
2. Look for the menu labeled "Drawer" on the right of the design panel. It would be arranged in a vertical order as Cabinet&gt;Partition&gt;Drawer Systems&gt;Drawer&gt; Panel etc. Click on it to access the settings related to drawer.
3. Within the "Drawer" menu, go into the "Quick Access" or "Construction" tab and you will find the "Dimension parameters" section. Click on the drop down next to it to open the details.
4. Input a revised value in mm for the drawer height to change the height of the drawer. 
5. If it is a two-drawer cabinet, then the other drawer's height will get revised as it will reduce by the same value as we have increased in the height of the selected drawer. Only one drawer can be a fixed height in this case. 
6. Similarly, in case of a three-drawer cabinet, two drawers can be of fixed heights and one drawer will be considered as per the remaining height of the cabinet. 